Training Manual Work Station 1,5 Days
Consisting of a material preparation and/or feeding system and a dispenser with stand, a Scheugenpflug manual work station is already a fully fledged dispensing system that requires proficient handling.
Why should you participate?
This Training is on the one hand the basis for the Advanced Training and on the other hand creates the prerequisites for safe and productive handling of the relevant system and its components. Equally important here is the acquisition of absolutely necessary basic knowledge of dispensing technology and the handling of adhesives or potting materials.
Contents
- Brief introduction to dispensing technology
- Getting to know the relevant system and its components
- Discussion of the relevant material data sheets TDS and MSDS
- Overview and application of technical documentation
- Overview of functions, set-up and operation
- Basics of system parameterization
- Fundamentals of dispensing program creation
- Maintenance and repair
- Process monitoring and quality assurance
- Troubleshooting
Goals
- Understanding the relationships between material - dispensing technology - application result
- Correct setup and start-up of the system
- Safe operation and handling of the system and its components
- Correct setting of the necessary machine parameters
- Targeted creation of dispensing programs
- Sustainable maintenance and repair of components
- Recognize and interpret fault patterns, alarms and warnings and initiate corrective actions
Further information
Order number | 3DLG00373 |
---|---|
Training duration | 1,5 days |
Number of participants | Max. 6 |
Language | German, English, others on request |
Methodology | Teaching interview, group work/case approach, practical exercises |
For on-site training | System freely accessible, room with projector, flipchart |
Relevant systems | Dos A90 | Dos A310 | PailFeed |
Target group
The training is aimed at people who carry out basic operating steps at a Scheugenpflug manual work station. Basic operating steps include daily set-up and dismantling, operating tasks as well as maintenance and repair work.
- Operators
- Service / maintenance personnel
- Process managers
- Production managers